A clean car helps enhance the overall appearance of the vehicle while playing an important…
How Can You Protect the Car Paint with Car Wax and Polishing in Christchurch
If you care about the exterior of your car, you may require to do much more than washing at regular interval. To uphold the rich and deep colour of the vehicle, you must protect them external elements. It allows the car to shine. Resale value of the car may increase. One of the best ways to protect the car paint is the car wax and polishing in Christchurch. However, it is important note the fact that car waxing and polishing is not the same thing. It is better to learn the difference and use it to your advantage.
So, where the difference between car wax and polishing lies. Let’s learn about the distinction and when to use each of them for better results.
What is Car Polishing?
During car polishing, professional uses abrasives to eliminate imperfections from the paint surface such as scratches, swirls, and watermarks. In addition, the process also helps the paint to shine by adding depth to the weathered and dull paint.
Most of the polishes come with a cream or a liquid base. Presence of the abrasive in the polishes eradicates a thin paint layer exposing a new and fresh layer beneath. During polish, minimal amount of material is removed. Therefore, you may not able to see with the naked eye.
Some of the polishes may contain hard abrasives. If professionals use these polishes, they may able to cut more imperfections. However, it is better to use them over a hard paint as the soft paint may experience scratch with this type of polish. For the soft paint, it is necessary to go with a light polish.
How to Use Car Polish
Professionals use hand or an orbital buffer following a cleaning and drying. Small amount of polish is applied on the applicator pad while car polishing with the hand. It is essential to apply polish at one place in a circular motion continuously.
Following to the application of polish in the entire section, professional may clean the excess using a dry microfiber towel. It is a process that must be repeated continuously all over the car.
While using an orbital buffer, professionals begin with a lower setting. Later on, speed can be increased gradually. Few drops of the polish must be put over the buffer pad directly for effective application. Consistent pattern of application helps avoid the paint damage. Buffing process must be continued until the polish disappears.
What is Car Wax?
Car wax is a material that helps create coat between the paint and the exterior elements such as dirt, dust, water and UV rays. When the wax is applied to the car exterior, you may able to observe a shine. Both natural and synthetic materials such as beeswax, polymer resins and carnauba wax can be utilised on the occasion. Some of the waxes are created to deliver clear coat. However, there are some for single-stage paint.
How to Use Car Wax
Car wax can be applied with the help of foam applicator and orbital buffer. Regardless of the chosen method, it is important to start with the cleaning process. If dirt, debris and dust is still present on the surface, you may notice streak or scratch over the paint while applying car wax.
When to Choose Car Polish Vs Wax
By looking at the difference between the car wax and polishing in Christchurch, you may able to know what to apply when.
Car Polish
Car polish is required only once or twice a year. It is better not to over polish the car. If polishing is done too often, it may cause damage to the paint. You must follow a schedule when it comes to car polishing.
Car Wax
Car waxing can be done once in every three months. If your car is exposed to the salt, dust, UV rays and harsh weather conditions, you may require to wax your car often in order to safeguard your paint.